Only 20-30 years ago, the only reliable way to deal with age-related changes was surgical facial plastic surgery. Then came the time of fillers and Botox. All of these techniques, despite some advantages, have drawbacks. Fortunately, new ways of prolonging youth are constantly being discovered. Skin can be firm, fresh and healthy even without injections. This has been successfully proven by hardware cosmetology for facial rejuvenation. Examinations of numerous patients confirm this fact.
Hardware techniques have become a new step in the development of cosmetology. They allow you to quickly and painlessly remove many imperfections in appearance and significantly rejuvenate the skin. All procedures are performed using special devices. And the desired result is achieved by exposure to ultrasound, cold, vibration, vacuum or electric waves.
Hardware procedures are becoming more popular every year. Patients who have tried these unique techniques share their impressions on the Internet and leave positive reviews. Hardware cosmetology for facial rejuvenation is able to deal with pigmentation, wrinkles, enlarged pores and acne. In addition, it is able to tighten the skin, tighten the oval, increase collagen production and correct passages. We can say that the indication for the procedure is the patient's desire to maintain youth, as well as improve the condition of the skin.
Hardware rejuvenation methods can be divided into two types:
A dermatologist should choose the most appropriate method of hardware rejuvenation. The result largely depends on the qualifications of the experts, as well as on the quality of the equipment.
Choose your clinic or salon carefully. It is recommended to focus on the critiques and recommendations of friends who have seen a positive result from the use of hardware cosmetology. The equipment must have all the necessary licenses and certificates.
The following devices are used for procedures in clinics and salons:
Salons often use special cosmetic combinations. Just one such device can perform about 20 different procedures.
Myostimulation - the effect on muscles with the help of electric current. At home and in beauty salons, the procedure is performed using portable or stationary devices called myostimulants. They are devices of different sizes, with built-in or extended electrodes on the wires with elements of conductive material.
The principle of operation of the device is as follows:after the transmission of electrical impulses to nerve endings, muscle tissue begins to shrink, resulting in increased muscle elasticity, improved lymphatic drainage, blood microcirculation and accelerated cell metabolism.
The purpose of myostimulation can be different:therapeutic-prophylactic, aesthetic. Depending on the required effect, the choice of myostimulators is made. Various combinations of frequencies of sent pulses and their duration, number of channels for "sending" signals, size of electrodes cause many positive results of myostimulation. Modern devices for electrical muscle stimulation can be used on any part of the body: problem areas, back, spine and joints, and even the face.
There are two main types of muscle stimulators:
Cheap home muscle stimulators have a maximum of 4 electrodes, often run on batteries and have low power. They rarely have a wide range of selected programs, there is no function of directed lymphatic drainage. Household appliances are widespread, sold everywhere, but their effectiveness is lower than salon muscle stimulators.
Among professional devices there are devices with more than 40 electrodes, which have many channels, high power, as well as several possible programs for processing body zones (tightening, improving lymphatic drainage, "breaking" fat, electrophoresis, "relaxation", etc. ). etc. ). A good effect from the operation of the myostimulator can be achieved if a separate current transformer is "attached" to each of the channels.
Often up to 3 cm in volume is lost after the 1st myostimulation procedure; for a standard course (10-12 procedures) you can bring your figure back to normal, unless, of course, pronounced obesity is noticed.
Another principle of dividing myostimulants into groups - according to their area of influence:
Although muscle stimulants can be used for some medicinal purposes, they are most commonly used to improve the appearance of the figure and to tone the skin. The pulses emitted by the device regularly cause muscle contraction, providing an effect comparable to exercise.
Activation of metabolism and acceleration of toxin excretion by lymphoma lead to fat breakdown and outflow of excess intercellular fluid. Improving blood microcirculation in turn causes "refreshment" of skin color, increase its turgor, lifting effect.
Women more often use procedures for anti-cellulite massage, weight loss, increase skin density, and men - to create relief in the muscles, ensure more even pumping of muscle fibers along with physical training, as well as to remove myalgias.
Among other things, muscle stimulators can give the following results:
The advantages of the devices compared to other weight loss and body training devices are their practicality, without the need for intense exercise and the possibility of home use.
Often, high-quality performance of "electromassage" of muscles is possible only with the use of professional equipment. At home, the use of strong myostimulants is almost impossible: special knowledge and proper massage technique are required. Usually, home appliances are focused only on maintaining shape or removing small fat deposits.
To eliminate large “reserves” of fat and cellulite, you will need to not only do “gymnastics for the lazy” but also eat properly and exercise. In addition, if the muscle load remains at the initial level, the tissues "get used" to the effect and stop "producing" the required response: the contraction of the fibers slows down.
Among the "disadvantages" of using muscle stimulators are:
There are many contraindications to the procedure of muscle stimulation using electrical impulses:
The term "hardware rejuvenation" does not mean that the procedures solve the problems of exclusively mature skin. It all depends on the condition of the epidermis. Even adolescents can remove pigmentation, clean and narrow pores with the help of cosmetic devices. And the first anti-aging procedures, if there are indications, should be carried out at the age of 25. They are mainly aimed at moisturizing and regenerating the skin.
After 35 years, wilting processes begin to flow faster. At this age, the skin is called mature. Now, more aggressive methods of hardware cosmetology are needed to rejuvenate the face. Cosmetologist reviews say that RF-lifting, fractional laser and microcurrent therapy show the best results.
Fractional laser can slow down skin aging. During the procedure, it acts on the skin in doses. Thanks to a special extension, one laser beam is divided into many small ones. This provides a fractional (as through a sieve) effect on the epidermis.
Laser beams leave micro damage to the skin. It stimulates epidermal cells to produce collagen and elastin. These two materials provide turgor to the skin.
The fractional laser provides excellent lifting. This is confirmed by numerous reviews. The laser facial rejuvenation procedure removes atonic laxity, oval relaxation, wrinkles, vascular network, stretch marks and scars. In addition, it narrows pores and removes pigmentation.
Numerous reviews prove: modern ionic massagers take into account all the nuances of working with sensitive and thin facial skin.Among the advantages of assembling the device are:
The principle of the ion massager is based on the physical properties of ions.
Write it down!By sending it deep into the skin, the device facilitates the effective penetration of nourishing serums and creams into almost all layers of facial tissue.
At the same time, microcurrents stimulate skin cells to grow and speed up metabolism, improving the permeability of membranes to nutrients.
To get the most out of your sessions, follow theIon Vibrating Massager guidelines:
Ultrasound works on the same principle as radio waves in a procedure such as RF face-lift. What it is, is described above. The main difference is the depth of impact. Ultrasound can penetrate where radio waves do not reach. It affects the deepest layers of the skin.
It is impossible to say with certainty which method is more efficient. Ultrasound lifting is suitable for some patients. The skin of others responds better to radio waves. Therefore, the doctor should decide on the method of rejuvenation.
Ultrasonic stimulation warms the inner layers of the skin. Thanks to that, the metabolism in the tissues is accelerated, toxins are removed and collagen is produced. And the microcirculation of blood also increases.
The benefits of a weak pulse current on the body have been known for a long time. Physiotherapists have successfully used this method to relieve pain in urolithiasis, cholecystitis and other pathologies. Modern cosmetologists also use microcurrent effects to improve the condition of the skin. The popularity of this method is constantly growing.
Facial microcurrent therapy is recommended for light oval modeling and maintenance of muscle tone. It is completely painless. The patient may feel a slight tingling sensation as the beautician runs a special nozzle along the facial massage lines.
Electrical impulses enhance cell regeneration, collagen and protein synthesis of hyaluronic acid. They remove metabolic products and toxins, improve blood circulation. They also tone the skin.
After the procedure, the face is visibly younger. The result lasts six months. Much depends on the initial condition and characteristics of the patient's skin.
You can rejuvenate your skin without injections. Doctors have found an opportunity to introduce nutrients and moisturizers into the deep layers of the dermis in a non-invasive way. This procedure is called non-injection mesotherapy. This is another effective hardware technique for facial rejuvenation.
The procedure solves the following problems:
In order to deliver the substances of the rejuvenating cocktail deep into the skin, it is necessary to increase the permeability of the epidermal cells. This can be done with weak electrical pulses or an infrared laser. The result is noticeable after the first procedure. It lasts eight to ten months.
Before starting iontophoresis, carefully remove dirt, grease and cosmetics from the skin with special means. Cosmetic massage with preparations that contain ointments before the event is not recommended, use oily masks. Such procedures are more useful to perform some time after the procedure.
If the area to be treated is covered with hair, it must be removed (for example, if the thigh is to be treated). Iontophoresis can be performed a few days after hair removal. This is due to poor conduction of current through the hair, moreover, because of them a person may feel discomfort during manipulations.
We invite you to get acquainted with skin care after childbirth - a natural skin remedy and the principles of home procedures
If you have very dry, dandruffy skin, exfoliation is recommended to remove the stratum corneum.
What factors can cause discomfort?
Metal jewelry should be removed before the procedure. The main moment of preparation, without which iontophoresis is impossible, is facial cleansing. You have to remove makeup from it and disinfect it. To do this, make a soda solution, moisten a cloth mask and apply it on the face.
Disinstruction is performed with the same iontophoresis apparatus.
The negative electrode should be moved over the mask to the face for 15 - 20 minutes. This will cleanse the skin without drying it out. If you want to speed up the procedure, you can simply wipe your face with an alcoholic solution without disinfection.
Dosed tissue cooling allows you to solve many problems that occur due to the aging process of the skin. This effective method has been adopted by professionals in aesthetic medicine. Hardware cryotherapy of the face allows you to remove edema, wrinkles, age spots and scars. In addition, the oval renews and improves skin color.
Liquid nitrogen is used for the procedure. Its temperature reaches minus 195 degrees. The substance for facial cryomassage is delivered through a special tube-tank with different extensions. The duration of the procedure does not exceed 10 minutes.
High intensity pulsed light for facial rejuvenation is relatively new. It was originally used for photoepilation. Over time, cosmetologists have noticed that in places exposed to impulse light, the condition of the skin improves: pigment spots disappear, spider veins become less noticeable. In addition, wrinkles are evened out. Immediately after that, a facial rejuvenation technique was developed.
Phototherapy provides dosed warming of the dermis. It acts on its papillary layer. This increases the intensity of such biochemical processes in the skin as neocholalagenogenesis.
Phototherapy is one of the most effective hardware procedures for facial rejuvenation. After only a few sessions, the deepest wrinkles are smoothed, an oval is outlined, flies are tightened. The course consists of four to eight procedures. The result after photorejuvenation lasts six months.
The procedure we are considering allows you to ensure that the required concentration of the drug is delivered directly to the problem area, without allowing it to penetrate other parts of the body.
When the drug is injected into the body using electricity, the risk of side effects is extremely low. This is due to the fact that they enter the body in their purest form and also do not affect the digestive system. Also, the concentration of the drug in the blood is not too high, the current reduces the sensitivity and at the same time has a positive effect on the immune system.
The use of the drug by electric current does not give negative consequences
Thanks to this procedure, it is possible to ensure the long-term effect of the drug, because a special "warehouse" is created in the skin.
The therapeutic effect of injected drugs can be improved, because they enter the body in an ionized state, and the effect occurs in the background of galvanization.
Due to being overweight, flying and double chins can occur even in young girls. In addition, nasolabial folds become more noticeable. All this deforms the lower part of the face. It also visually adds a few extra years.
Fat removal allows the face to return to its original features. This can be done by ultrasonic liposuction. It only destroys fat cells and does not affect other tissues.
During the procedure, the doctor makes several thin stitches. No scars and scars. Within five days the swelling completely recedes.
Ultrasonic liposuction is one of the best hardware procedures for facial rejuvenation, as it allows you to solve the problem of sagging cheeks and fuzzy ovals, as well as double chins. In addition, the procedure stimulates the formation of collagen fibers that are responsible for skin elasticity.
A modern woman is able to take care of her own skin and prevent it from fading. Home hardware cosmetics for her face help her with that. Many procedures can be performed without the help of a dermatologist. For quality care, you only need to choose the right cosmetic device.
For home use you can buy:
Using home beauty products does not require any special skills. Everything you need to know is described in detail in the instructions. We must not forget about the contraindications.
This method of preserving youth and beauty has many followers, which is due to its undeniable advantages.
The following factors are among the pluses of home hardware cosmetics:
The main thing that aesthetic medicine cares about is safety. Patients who choose hardware cosmetology may not be afraid of anesthesia and a long period of rehabilitation. Such procedures reduce the risk of side effects and medical errors. This is confirmed by the critics.
Hardware cosmetology for facial rejuvenation should not be used only in some cases. Contraindications include:
